Publications
Selected Publications
- Details
-
Category: Uncategorised
-
Published on Thursday, 04 January 2007 06:09
-
Written by Administrator
Several recent papers have used Elionix products in order to conduct their research. Click on the following products to view the list of papers that have used that Elionix product. Electron Beam Lithography 3D e-RAM Nano-Indentor 3D e-RAM- Mechanical properties of SiC composites incorporating SiC-coated multi-walled carbon nanotubes
International Journal of Refractory Metals and Hard Materials, Working Paper, Available online 24 October 2006, Yoshiaki Morisada, Yoshinari Miyamoto, Yuichi Takaura, Ken Hirota and Nobuyuki Tamari
- Orthodontic bracket bonding: Enamel bond strength vs time
American Journal of Orthodontics and Dentofacial Orthopedics, Volume 130, Issue 4, October 2006, Pages 435.e1-435.e6 Akira Yamamoto, Takeshi Yoshida, Keishi Tsubota, Toshiki Takamizawa, Hiroyasu Kurokawa and Masashi Miyazaki
- Ni-SDC cermet anode fabricated from NiO–SDC composite powder for intermediate temperature SOFC
Journal of Power Sources, Volume 157, Issue 2, 3 July 2006, Pages 754-757 Teruhiko Misono, Kenji Murata, Takehisa Fukui, Jintawat Chaichanawong, Kazuyoshi Sato, Hiroya Abe and Makio Naito
- Effect of CPP–ACP paste on mechanical properties of bovine enamel as determined by an ultrasonic device
Journal of Dentistry, Volume 34, Issue 3, March 2006, Pages 230-236 Kanako Yamaguchi, Masashi Miyazaki, Toshiki Takamizawa, Hirohiko Inage and B. Keith Moore
- Microstructural control of Ni–YSZ cermet anode for planar thin-film SOFCs
Fuel Cells Bulletin, Volume 2006, Issue 3, March 2006, Pages 12-15 Hiroya Abe, Kenji Murata, Takehisa Fukui, W.-J. Moon, Kenji Kaneko and Makio Naito
- Combustion synthesis of fine AlN powder and its reaction control
Materials Science and Engineering: A, Volume 416, Issues 1-2, 25 January 2006, Pages 40-44 T. Sakurai, O. Yamada and Y. Miyamoto
- The synthesis of hierarchical porous iron oxide with wood templates
Microporous and Mesoporous Materials, Volume 85, Issues 1-2, 23 October 2005, Pages 82-88 Zhaoting Liu, Tongxiang Fan, Wang Zhang and Di Zhang
- A comparative electrochemical study of iron deposition onto n- and p-type porous silicon prepared from lightly doped substrates
Electrochimica Acta, Volume 50, Issue 27, 20 September 2005, Pages 5340-5348 Farid A. Harraz, Tetsuo Sakka and Yukio H. Ogata
- Three-dimensional nano-structure of in situ silica in natural rubber as revealed by 3D-TEM/electron tomography
Polymer, Volume 46, Issue 12, 26 May 2005, Pages 4440-4446 Shinzo Kohjiya, Astushi Katoh, Junichi Shimanuki, Toshinori Hasegawa and Yuko Ikeda
- SiC-coated carbon nanotubes and their application as reinforcements for cemented carbides
Materials Science and Engineering A, Volume 381, Issues 1-2, 15 September 2004, Pages 57-61 Y. Morisada and Y. Miyamoto
- Quantitative measurement of mRNA at different loci within an individual living cell
Ultramicroscopy, Volume 100, Issues 3-4, August 2004, Pages 197-201 Hironori Uehara, Toshiya Osada and Atsushi Ikai
- High sensitivity detection of protein molecules picked up on a probe of atomic force microscope based on the fluorescence detection by a total internal reflection fluorescence microscope
FEBS Letters, Volume 569, Issues 1-3, 2 July 2004, Pages 59-64 Takafumi Yamada, Rehana Afrin, Hideo Arakawa and Atsushi Ikai
- New approach to enhance the photocatalytic activity of plasma sprayed TiO2 coatings using p-n junctions
Surface and Coatings Technology, Volume 184, Issues 2-3, 22 June 2004, Pages 233-238 Fuxing Ye, Akira Ohmori and Changjiu Li
back to top Electron Beam Lithography- Pressure-driven flow control system for nanofluidic chemical process
Journal of Chromatography A, Volume 1137, Issue 2, 29 December 2006, Pages 256-262 Eiichiro Tamaki, Akihide Hibara, Haeng-Boo Kim, Manabu Tokeshi and Takehiko Kitamori
- Fabrication of nano-pillar chips by a plasma etching technique for fast DNA separation
Thin Solid Films, Working Paper, Available online 27 November 2006, R. Ogawa, H. Ogawa, A. Oki, S. Hashioka and Y. Horiike
- MFM observation of spin structures in nano-magnetic-dot arrays fabricated by damascene technique
Journal of Magnetism and Magnetic Materials, Volume 304, Issue 1, September 2006, Pages 10-13 K. Sato, T. Yamamoto, T. Tezuka, T. Ishibashi, Y. Morishita, A. Koukitu, K. Machida and T. Yamaoka
- Multiple simultaneous fabrication of molecular nanowires using nanoscale electrocrystallization
Thin Solid Films, Volume 499, Issues 1-2, 21 March 2006, Pages 289-292 Hiroyuki Hasegawa, Rieko Ueda, Tohru Kubota and Shinro Mashiko
- A step-and-repeat UV-nanoimprint lithography process using an elementwise patterned stamp
Microelectronic Engineering, Volume 82, Issue 2, October 2005, Pages 180-188 Jun-ho Jeong, Ki-don Kim, Young-suk Sim, Hyonkee Sohn and Eung-sug Lee
- Wafer deformation in ultraviolet-nanoimprint lithography using an element-wise patterned stamp
Microelectronic Engineering, Volume 82, Issue 1, September 2005, Pages 28-34 Young-suk Sim, Ki-don Kim, Jun-ho Jeong, Hyonkee Sohn, Eung-sug Lee and Sang-chan Lee
- Requirements for Laser-Induced Desortion/Ionization on Submicrometer Structures
Analytical Chemistry, Volume 77, Issue 16, 15 August 2005, Pages 5364-5369 Shoji Okuno, Ryuichi Arakawa, Kazumasa Okamoto, Yoshinori Matsui, Shu Seki, Takahiro Kozawa, Seiichi Tagawa and Yoshinao Wada
- Ideally ordered anodic porous alumina with Sub-50 nm hole intervals based on imprinting using metal molds
Journal of Vacuum Science & Technology B: Microelectrons and Nanometer Structures, Volume 23, Issue 4, July 2005, Pages L9-L12 Kenji Yasui, Kazuyuki Nishio, Hiroshi Nunokawa and Hideki Masuda
- Fabrication and electrochemical characterization of interdigitated nanoelectrode arrays
Electrochemistry Communications, Volume 7, Issue 2, February 2005, Pages 161-165 Kosei Ueno, Masayuki Hayashida, Jia-Yu Ye and Hiroaki Misawa
- Preparation and properties of two-dimensional PLZT photonic crystals using a sol–gel method
Journal of the European Ceramic Society, Volume 25, Issue 12, 2005, Pages 2917-2920 T. Aoki, M. Kondo, M. Ishii, A. Sugama, M. Tsukada, K. Kurihara and M. Kuwabara
- Spin polarized transports through a narrow-gap semiconductor wire with ferromagnetic contacts formed on InAlAs step-graded buffer layers
Science and Technology of Advanced Materials, Volume 5, Issue 3, May 2004, Pages 305-308 Masashi Akabori and Syoji Yamada
- Micro-optical components based on silicon mold technology
Optics and Lasers in Engineering, Volume 41, Issue 3, March 2004, Pages 545-552 Yigui Li, Sasaki Minoru and Hane Kazuhiro
- Nanofabrication of magnetic tunnel junctions by using side-edge thin film deposition
Science and Technology of Advanced Materials, Volume 4, Issue 4, 1 July 2003, Pages 347-352 T. Niizeki, H. Kubota, Y. Ando and T. Miyazaki
- Extraordinary Hall effect in Fe–Pt alloy thin films and fabrication of micro Hall devices
Thin Solid Films, Volume 405, Issues 1-2, 22 February 2002, Pages 92-97 M. Watanabe and T. Masumoto
- Extraordinary Hall effect in Fe–Pt alloy thin films and fabrication of micro Hall devices
Thin Solid Films, Volume 405, Issues 1-2, 22 February 2002, Pages 92-97 M. Watanabe and T. Masumoto
- Fabrication and optical study of quantum dots, quantum wires and quantum wells of II–VI diluted magnetic semiconductors
Journal of Crystal Growth, Volumes 214-215, 2 June 2000, Pages 183-186 N. Takahashi, K. Takabayashi, E. Shirado, I. Souma, J. X. Shen and Y. Oka
- Determination of proximity effect parameters and the shape bias parameter in electron beam lithography
Microelectronic Engineering, Volume 53, Issues 1-4, June 2000, Pages 305-308 Eunsung Seo, Bo Kyung Choi and Ohyun Kim
back to top
Nano-Indentor- Hardness of high-pressure high-temperature treated single-walled carbon nanotubes
Physica B: Condensed Matter, Volume 388, Issues 1-2, 15 January 2007, Pages 59-62 S. Kawasaki, Y. Nojima, T. Yokomae, F. Okino and H. Touhara
- Effect of hydrogenated DLC coating hardness on the tribological properties under water lubrication
Tribology International, Volume 39, Issue 12, December 2006, Pages 1609-1614 Kenji Yamamoto and Katsuhiro Matsukado
- Effects of solvent drying time on micro-shear bond strength and mechanical properties of two self-etching adhesive systems
Dental Materials, Working Paper, Available online 20 November 2006, Alireza Sadr, Yasushi Shimada and Junji Tagami
- Effects of storage time and temperature on the properties of two self-etching systems
Journal of Dentistry, Working Paper, Available online 22 September 2006, Alireza Sadr, Amir Ghasemi, Yasushi Shimada and Junji Tagami
- Friction and wear behavior of BCN coatings sliding against ceramic and steel balls in various environments
Wear, Volume 261, Issues 3-4, 30 August 2006, Pages 301-310 Fei Zhou, Koshi Adachi and Koji Kato
- Sliding friction and wear property of a-C and a-CNx coatings against SiC balls in water
Thin Solid Films, Volume 514, Issues 1-2, 30 August 2006, Pages 231-239 Fei Zhou, Koshi Adachi and Koji Kato
- Nano-multilayered CrN/BCN coating for anti-wear and low friction applications
Surface and Coatings Technology, Working Paper, Available online 28 August 2006, K. Yamamoto, Hirotaka Ito and S. Kujime
- DLC film coating on plasma-carburized austenitic stainless steel
Surface and Coatings Technology, Working Paper, Available online 9 August 2006, N. Ueda, N. Yamauchi, T. Sone, A. Okamoto and M. Tsujikawa
- Age-related changes in hardness and modulus of elasticity of dentine
Archives of Oral Biology, Volume 51, Issue 6, June 2006, Pages 457-463 Pisol Senawongse, Masayuki Otsuki, Junji Tagami and Ivar Mjör
- Stress control of a-SiC films deposited by dual source dc magnetron sputtering
Vacuum, Volume 80, Issue 7, 31 May 2006, Pages 744-747 S. Inoue, T. Namazu, H. Tawa, M. Niibe and K. Koterazawa
- Load effects on the phase transformation of single-crystal silicon during nanoindentation tests
Materials Science and Engineering: A, Volume 423, Issues 1-2, 15 May 2006, Pages 19-23 Jiwang Yan, Hirokazu Takahashi, Xiaohui Gai, Hirofumi Harada, Jun’ichi Tamaki and Tsunemoto Kuriyagawa
back to top
Image Gallery
- Details
-
Category: Uncategorised
-
Published on Friday, 21 July 2006 07:34
-
Written by Administrator
Here are pictures that have been taken using the 3D Electron Roughness Analyzing Microscope e-RAM 8900FE. Click on the individual images to see a larger picture. AFM Tip 
DVD 
Recordable CD 

Used Surgical Knife 
Razor Blade 
Ceramic Surface 
Penny Backside 
Elionix Product Lines
- Details
-
Category: Uncategorised
-
Published on Friday, 21 July 2006 06:17
-
Written by Administrator
 Elionix Product Line
Elionix offers 125, kV, 100 kV, 80 kV, and 50 kV systems.
Using multiple detectors and proprietary technology, the electron beam surface roughness analyzers are capable of getting combined information similar to your SEM and AFM, but much quicker and easier.
|